PC Stuff

Basic Tips on How to Properly Troubleshoot A PC

Every PC owner should know how to properly troubleshoot their PC. Being able to properly know how to troubleshoot your PC will help you narrow down your possible problems and save you a lot of time and effort.

Troubleshooting Software

To troubleshoot PC software, the first thing you need to do is to try and determine the cause of the problem. Doing this will help you narrow down the possible causes and help you fix the problem faster. First think about what did you do before the problem occurred. Did you change a few settings? Did you install some new software? Did you download a file? Do some backtracking and remember the things you did before the problem started showing.

Often times PC software problems are related to settings that are not compatible, miscommunication with other software, or a missing file of sorts. Revert whatever changes you made and see if the problem has been solved.

Reinstall the Software

If the problem still persists try to reinstall the software with the problem. Often times reinstalling a software solves most problems that users encounter. Just make sure to do a clean uninstall, and wipe out everything that is connected to that software.

Another thing you could try is to install an older version. Maybe the new version of the software has some bugs or doesn’t work well with your system so reinstalling an old one can solve the problem for you.

Hardware Troubleshooting

Hardware troubleshooting may be a little harder since there are a lot of different things and factors that can be the cause of the problem. Again the first thing you need to do when you are facing problems with your PC hardware is to backtrack. Remember whatever changes you made or if you have done something out of the ordinary before the problem occurred.

Check All Cables and Components

The first thing you should do before doing anything drastic such as taking your computer down, is to check if all the cables are plugged-in properly. A lot of PC user encounter problems and end up losing their minds because they cannot figure out what is causing the problem, they then find out that it was just a loose cable. Check all your cables properly and make sure that nothing has been yanked out or removed, also double check if everything is plugged into where it is supposed to be. Sometimes having no display is just a result of plugging your monitor to your motherboard instead of your GPU.

The next thing you should do when doing some hardware troubleshooting, is to check if all components are properly installed. Loose RAM can cause a lot of problems, unplugged GPU can result in no display, or maybe some components are shorting out. Make sure to eliminate all the simple things before doing anything that requires a lot more time and effort.

Invest in a Motherboard Speaker

A lot of modern motherboards nowadays have a troubleshooting LED that helps you find out what exactly is causing the problem. These motherboards can be quite expensive though. If you don’t have a motherboard with the troubleshooting LED feature, do not worry because you can still use a motherboard speaker to help you diagnose your problems.

Motherboard speakers are usually very cheap, and some even come with your case. These speakers help a lot when doing some PC troubleshooting because they give out certain beep codes for each possible problem. Using one can help you narrow down your possible problems. Beep codes can vary from motherboard to motherboard so doing a quick search can help you determine what your beeps stand for. After figuring out what the problem is, try to play with it around such as unplugging and plugging the component, removing a RAM stick or switching to a different display port. If you are out of options or think that it might be a dead component bring it to an expert near you to prevent further damage.


Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close
Close